Brandt 20-20-20 Water Soluble Fertilizer With Chelated Micronutrients - 25 Lb
Foliar applications are used as a supplemental method of feeding to help correct nutrient deficiencies and enhance crop quality and are not intended to replace a complete fertility program. Applications to actively growing plants produce the best results. Avoid foliar applications of this product when plants are suffering from moisture stress or during periods of high temperature and low humidity.
Features
Mixing and handling instructions
Compatibility
Brandt 20-20-20 micro may be applied separately or in conjunction with most pesticides and with other fertilizers. The addition of wetting agents often enhances nutrient uptake. Do not use with basic metal sulfates, strongly alkaline materials (such as hydrated lime and lime sulfur), or spray oils. A compatibility test is recommended if the desired combination has not been previously used. Tank mixtures with copper-based products can be phytotoxic due to the increased solubility of copper. Before general applications, apply the spray solution to a small test area of the foliage to determine any undesirable phytotoxic effects.
Mixing
Dissolve the recommended amount of this product into approximately one-half the required water. Note: 2 lb of this product per 100 gal equals 1 oz/3 gal or 1 tbsp/1 gal. Slowly add the remaining water while maintaining constant agitation. Water quality and temperature will water-soluble fertilizer with chelated micronutrients 20-20-20 to determine maximum solubility. Warmer water temperatures increase solubility and shorten dissolving time. As this product goes into the solution, the water temperature will drop. Therefore it is important when preparing concentrated solutions to allow for this temperature drop to insure that the fertilizer is completely dissolved. Do not exceed 2 lb brandt 20-20-20 micro per gallon of finish spray.
Guaranteed Analysis
- Total Nitrogen: 20.00%
- Ammoniacal Nitrogen: 3.5%
- Nitrate Nitrogen: 5.5%
- Urea Nitrogen: 11.0%
- Available Phosphate (P2O5): 20.00%
- Soluble Potash (K2O) : 20.00%
- Boron: 0.02%
- Copper: 0.05%
- Chelated Copper: 0.05%
- Iron: 0.10%
- Chelated Iron: 0.10%
- Manganese: 0.05%
- Chelated Manganese: 0.05%
- Molybdenum: 0.0005%
- Zinc: 0.05%
- Chelated Zinc: 0.05%
Specifications
- Size: 25 lb
Foliar applications are used as a supplemental method of feeding to help correct nutrient deficiencies and enhance crop quality and are not intended to replace a complete fertility program. Applications to actively growing plants produce the best results. Avoid foliar applications of this product when plants are suffering from moisture stress or during periods of high temperature and low humidity.
Features
Mixing and handling instructions
Compatibility
Brandt 20-20-20 micro may be applied separately or in conjunction with most pesticides and with other fertilizers. The addition of wetting agents often enhances nutrient uptake. Do not use with basic metal sulfates, strongly alkaline materials (such as hydrated lime and lime sulfur), or spray oils. A compatibility test is recommended if the desired combination has not been previously used. Tank mixtures with copper-based products can be phytotoxic due to the increased solubility of copper. Before general applications, apply the spray solution to a small test area of the foliage to determine any undesirable phytotoxic effects.
Mixing
Dissolve the recommended amount of this product into approximately one-half the required water. Note: 2 lb of this product per 100 gal equals 1 oz/3 gal or 1 tbsp/1 gal. Slowly add the remaining water while maintaining constant agitation. Water quality and temperature will water-soluble fertilizer with chelated micronutrients 20-20-20 to determine maximum solubility. Warmer water temperatures increase solubility and shorten dissolving time. As this product goes into the solution, the water temperature will drop. Therefore it is important when preparing concentrated solutions to allow for this temperature drop to insure that the fertilizer is completely dissolved. Do not exceed 2 lb brandt 20-20-20 micro per gallon of finish spray.
Guaranteed Analysis
- Total Nitrogen: 20.00%
- Ammoniacal Nitrogen: 3.5%
- Nitrate Nitrogen: 5.5%
- Urea Nitrogen: 11.0%
- Available Phosphate (P2O5): 20.00%
- Soluble Potash (K2O) : 20.00%
- Boron: 0.02%
- Copper: 0.05%
- Chelated Copper: 0.05%
- Iron: 0.10%
- Chelated Iron: 0.10%
- Manganese: 0.05%
- Chelated Manganese: 0.05%
- Molybdenum: 0.0005%
- Zinc: 0.05%
- Chelated Zinc: 0.05%
Specifications
- Size: 25 lb