National Hardware Zinc Plated Corner Brace - 1" X 1/2"
SKU:
184804
UPC:
038613113046
$0.99
Features
- Hole Sizes Fit Phillips Flat Screws Sized #7
- Drill A Pilot Hole With A 3/32" Sized Drill Bit When Using Wood Screws
- Designed For Chests, Screens, Windows, Furniture, Etc
- Used For Reinforcing Inside Of Right-angle Corner Joints
- Screw Holes Are Countersunk
WeatherGuard
When Subjected To 312 Hours Of Salt Fog Spray Testing (BHMA A138.18), Zinc Plated Hardware Showed Severe Corrosion While Hardware With WeatherGuard Protection Withstood These Harsh Conditions With Very Little Deterioration.
Specifications
- Size: 1" X 1/2"
- Finish: Zinc Plated
- Material: Steel
- Certification: BHMA A138.18
Features
- Hole Sizes Fit Phillips Flat Screws Sized #7
- Drill A Pilot Hole With A 3/32" Sized Drill Bit When Using Wood Screws
- Designed For Chests, Screens, Windows, Furniture, Etc
- Used For Reinforcing Inside Of Right-angle Corner Joints
- Screw Holes Are Countersunk
WeatherGuard
When Subjected To 312 Hours Of Salt Fog Spray Testing (BHMA A138.18), Zinc Plated Hardware Showed Severe Corrosion While Hardware With WeatherGuard Protection Withstood These Harsh Conditions With Very Little Deterioration.
Specifications
- Size: 1" X 1/2"
- Finish: Zinc Plated
- Material: Steel
- Certification: BHMA A138.18