Zoom the image with the mouse
Minwax Fast-drying Polyurethane Finish - Gloss
SKU:
213538
UPC:
027426230002
$12.99
Minwax Fast-Drying Polyurethane Is A Clear, Oil-based, Durable Protective Finish.
Features
- Provides Long-lasting Beauty And Protection To Any Interior Wood Surface
- Among The Most Durable Coatings For Wood Protection
- Ideal For Woodwork, Furniture, Doors, Cabinets, And Floors
- Can Be Used On Both Finished And Unfinished Wood
Directions
- The Surface Must Be Dry And Free Of Old Finishes In Poor Condition, Paint, Wax, Grease, Polish, Dirt Or Other Foreign Matter.
- Sand To Obtain A Smooth Uniform Surface. Remove All Dust With A Cloth Dampened With Mineral Spirits.
- If Desired, Apply The Stain, Such As Minwax Wood Finish Or Minwax Gel Stain To Unfinished Wood Surfaces.
- Stir Minwax Fast-Drying Polyurethane Before And During Use To Eliminate Settling On The Bottom Of The Can. Stir To Rotate The Product From The Bottom To The Top Of The Can.
- Apply A Thin Coat Of Minwax Fast-Drying Polyurethane Using A High-quality Natural Or Foam Brush.
- For Floor Projects, Use A Square Buff Orbital Or Disk-type Sander With 220 Grit Sandpaper Or The Equivalent Grit Pad Or Screen (specifically Designed For Sanding Between Coats). Do Not Use A Belt Or Drum-type Sander For Sanding Between Coats.
- Apply Second Coat. If The Third Coat Is Desired, Repeat Step 6 Before Application.
- After The Final Coat, Allow 24 Hours Before Light Use.
Clean Up
Use Mineral Spirits Or Paint Thinner Following Manufacturer’s Safety Instructions.
Recommended Uses
Woodwork, Furniture, Doors, Cabinets And Floors.
Application Tool
A Natural Bristle Brush, Foam Brush, Or Lambswool Applicator.
First Aid
In Case Of Eye Contact, Flush Thoroughly With Large Amounts Of Water For 15 Minutes And Get Medical Attention. For Skin Contact, Wash Thoroughly With Soap And Water.
Warning
This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. If You Scrape, Sand Or Remove Old Paint, You May Release Lead Dust. Lead Is Toxic.
Specifications
- Sheens: Gloss
- Location: Interior Wood Surfaces
- Recoat: After 4-6 Hours
- Dry Time: 24 Hours Before Light Use
- Coverage: 25 Sq. Ft Per Qt
- Coats: 2-3
- Size: 1/2 Pint
Minwax Fast-Drying Polyurethane Is A Clear, Oil-based, Durable Protective Finish.
Features
- Provides Long-lasting Beauty And Protection To Any Interior Wood Surface
- Among The Most Durable Coatings For Wood Protection
- Ideal For Woodwork, Furniture, Doors, Cabinets, And Floors
- Can Be Used On Both Finished And Unfinished Wood
Directions
- The Surface Must Be Dry And Free Of Old Finishes In Poor Condition, Paint, Wax, Grease, Polish, Dirt Or Other Foreign Matter.
- Sand To Obtain A Smooth Uniform Surface. Remove All Dust With A Cloth Dampened With Mineral Spirits.
- If Desired, Apply The Stain, Such As Minwax Wood Finish Or Minwax Gel Stain To Unfinished Wood Surfaces.
- Stir Minwax Fast-Drying Polyurethane Before And During Use To Eliminate Settling On The Bottom Of The Can. Stir To Rotate The Product From The Bottom To The Top Of The Can.
- Apply A Thin Coat Of Minwax Fast-Drying Polyurethane Using A High-quality Natural Or Foam Brush.
- For Floor Projects, Use A Square Buff Orbital Or Disk-type Sander With 220 Grit Sandpaper Or The Equivalent Grit Pad Or Screen (specifically Designed For Sanding Between Coats). Do Not Use A Belt Or Drum-type Sander For Sanding Between Coats.
- Apply Second Coat. If The Third Coat Is Desired, Repeat Step 6 Before Application.
- After The Final Coat, Allow 24 Hours Before Light Use.
Clean Up
Use Mineral Spirits Or Paint Thinner Following Manufacturer’s Safety Instructions.
Recommended Uses
Woodwork, Furniture, Doors, Cabinets And Floors.
Application Tool
A Natural Bristle Brush, Foam Brush, Or Lambswool Applicator.
First Aid
In Case Of Eye Contact, Flush Thoroughly With Large Amounts Of Water For 15 Minutes And Get Medical Attention. For Skin Contact, Wash Thoroughly With Soap And Water.
Warning
This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. If You Scrape, Sand Or Remove Old Paint, You May Release Lead Dust. Lead Is Toxic.
Specifications
- Sheens: Gloss
- Location: Interior Wood Surfaces
- Recoat: After 4-6 Hours
- Dry Time: 24 Hours Before Light Use
- Coverage: 25 Sq. Ft Per Qt
- Coats: 2-3
- Size: 1/2 Pint
Related Products
