Easy Heat Pipe Heating Cable - 6'
SKU:
241783
UPC:
013627109513
$29.99
Features
- Fixed resistance, pre-terminated. For commercial and residential applications
- Keeps water flowing at ambient temperatures down to -40°F (-40°C)
- Cables are rated at 7 wt per 1' (0.30 m)
- The built-in thermostat turns on at +38°F (+3°C) or below and turns off at +45°F (+7°C) and above
- Plugs into a standard 120 VAC outlet, must be gfci protected
- Each cable consists of tough xlpe inner insulation, a continuous ground braid and weather-resistant pvc (high-low temperature) outer jacket
- Protects metal and plastic water-filled pipes up to 1-1/2" (38.1 mm) in diameter
- Pre-assembled and ready to install
- Integral thermostat saves energy by powering the cable only when needed
Certifications
- UL listed to canadian safety standards and CSA certified when used in accordance with instructions on water-filled metal or plastic pipes.
Accessories
- It is recommended to use easyheat HCA application tape or good quality electrical tape with a minimum +176°F (+80°C) temperature rating to secure heating cable(s) to pipes. See easyheat pipe tracing accessories
Specifications
- Wattage: 42 w
- Length: 6'
- Certification: UL Listed, CSA
- Warranty: 1 Year
Features
- Fixed resistance, pre-terminated. For commercial and residential applications
- Keeps water flowing at ambient temperatures down to -40°F (-40°C)
- Cables are rated at 7 wt per 1' (0.30 m)
- The built-in thermostat turns on at +38°F (+3°C) or below and turns off at +45°F (+7°C) and above
- Plugs into a standard 120 VAC outlet, must be gfci protected
- Each cable consists of tough xlpe inner insulation, a continuous ground braid and weather-resistant pvc (high-low temperature) outer jacket
- Protects metal and plastic water-filled pipes up to 1-1/2" (38.1 mm) in diameter
- Pre-assembled and ready to install
- Integral thermostat saves energy by powering the cable only when needed
Certifications
- UL listed to canadian safety standards and CSA certified when used in accordance with instructions on water-filled metal or plastic pipes.
Accessories
- It is recommended to use easyheat HCA application tape or good quality electrical tape with a minimum +176°F (+80°C) temperature rating to secure heating cable(s) to pipes. See easyheat pipe tracing accessories
Specifications
- Wattage: 42 w
- Length: 6'
- Certification: UL Listed, CSA
- Warranty: 1 Year