null Skip to main content
Zoom the image with the mouse

Easy Heat Pipe Heating Cable - 9'

SKU: 242027
UPC: 013627109520
$33.99

Easyheat AHB automatic electric water pipe heating cable is a preassembled and ready-to-install, cable that prevents metal and plastic pipes from freezing. These units are activated and de-activated by an integral energy-saving thermostat. They are suitable for commercial and residential metal or plastic water supply pipes subject to freezing temperatures.

Features
  • Fixed resistance, pre-terminated. For commercial and residential applications
  • Keeps water flowing at ambient temperatures down to -40°F (-40°C)
  • Cables are rated at 7 wt per 1' (0.30 m)
  • The built-in thermostat turns on at +38°f (+3°C) or below and turns off at +45°F (+7°C) and above
  • Plugs into a standard 120 vac outlet, must be gfci protected
  • Each cable consists of tough xlpe inner insulation, a continuous ground braid and weather-resistant pvc (high-low temperature) outer jacket
  • Protects metal and plastic water-filled pipes up to 1-1/2" (38.1 mm) in diameter
  • Pre-assembled and ready to install
  • Integral thermostat saves energy by powering the cable only when needed

Certifications

  • UL Listed to Canadian Safety Standards and CSA Certified When Used in Accordance with Instructions on Water-filled Metal or Plastic Pipes

Accessories

  • It is recommended to use easyheat HCA application tape or good quality electrical tape with a minimum +176°f (+80°c) temperature rating to secure heating cable(s) to pipes. See easyheat pipe tracing accessories
Specifications
  • Length: 9'
  • Wattage: 63 w
  • Warranty: 1 Year
 

Easyheat AHB automatic electric water pipe heating cable is a preassembled and ready-to-install, cable that prevents metal and plastic pipes from freezing. These units are activated and de-activated by an integral energy-saving thermostat. They are suitable for commercial and residential metal or plastic water supply pipes subject to freezing temperatures.

Features
  • Fixed resistance, pre-terminated. For commercial and residential applications
  • Keeps water flowing at ambient temperatures down to -40°F (-40°C)
  • Cables are rated at 7 wt per 1' (0.30 m)
  • The built-in thermostat turns on at +38°f (+3°C) or below and turns off at +45°F (+7°C) and above
  • Plugs into a standard 120 vac outlet, must be gfci protected
  • Each cable consists of tough xlpe inner insulation, a continuous ground braid and weather-resistant pvc (high-low temperature) outer jacket
  • Protects metal and plastic water-filled pipes up to 1-1/2" (38.1 mm) in diameter
  • Pre-assembled and ready to install
  • Integral thermostat saves energy by powering the cable only when needed

Certifications

  • UL Listed to Canadian Safety Standards and CSA Certified When Used in Accordance with Instructions on Water-filled Metal or Plastic Pipes

Accessories

  • It is recommended to use easyheat HCA application tape or good quality electrical tape with a minimum +176°f (+80°c) temperature rating to secure heating cable(s) to pipes. See easyheat pipe tracing accessories
Specifications
  • Length: 9'
  • Wattage: 63 w
  • Warranty: 1 Year