Zoom the image with the mouse
Homax Aerosol Wall Texture Knockdown - 10 Oz
SKU:
391623
UPC:
041072040600
$15.99
Homax Knockdown Aerosol Wall Texture can also be used to apply this attractive decorative finish to an accent wall. Once applied, this heavy-bodied wall texture is knocked down using a drywall knife to achieve the finished look. Both professional contractors and DIYers can get the performance and results deserved with our popular aerosol texture products.
Features
- Water-based And Low Odor
- Adjusts To Spray Medium To Heavy Knockdown Textures
- Easy Cleanup
Directions
Homax Knockdown Texture Is The Fastest Way To Patch knockdown Drywall Textures. To Achieve The Best Results, Please Read The Following Directions Carefully Before You Begin Your Wall Repair Project.
Ventilate Area Well. Protect Surrounding Area From Overspray. Do Not Spray On Clothing, Furniture Or Carpet.
- Water-based, Use Warm Water For Cleanup.
- Sprays Best Between 68°F And 72°F.
Directions For Use: Make Any Necessary Wall Repairs Before Applying. For Best Results, Prime/seal Area Before And After Applying Texture.
1. Shake can Vigorously FOR ONE MINUTE Prior To Use.
2. Twist off Safety Tab From Nozzle.
3. Always Practice Spraying On Cardboard Or Scrap Drywall To Determine Preferred Pattern. Pointing Away From Face, Adjust Dial To Desired Pattern:
- Straight Up For Light Knockdown.
- Counterclockwise For Heavy Knockdown.
4. Spray Using A Circular Motion. For A Heavier Knockdown Pattern, Spray In Short Bursts To Build Up Texture. Shake Can Occasionally Throughout Use.
5. Allow Texture To Dry For 4 To 8 Min, Then Knockdown. Use Knockdown Or 6-8 Drywall Knife, Wet Blade, Hold Nearly Parallel To Surface And Draw Across Texture Applying Little To No Pressure. Dry Time: Allow To Dry 2-5 hr Before Painting (depending On Heaviness Of Pattern).
6. To Store : To Store, Clear Nozzle By Turning Can Upside Down And Spraying Until Texture Is Cleared.
Specification
- Size: 10 oz
- Packaging Type: Aerosol
Warning
Contains Nepheline Syenite, Calcium Silicate, Toluene, Acetone, Xylene, Titanium Dioxide, Ethylbenzene and Propane/Isobutane blend (propellant). Vapors may cause flash fire. Keep away from heat, sparks and flame. Extinguish all flames and sources of ignition during use and until all vapors are gone. Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation. May affect the brain or nervous system causing dizziness, headache or nausea. Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Store upright in a cool, dry place. Avoid prolonged exposure to sunlight and other heat sources that may cause bursting. Do not puncture, incinerate, burn or store above 120°F. Use with adequate ventilation. Avoid breathing vapor and spray mist. Avoid contact with eyes and skin. Wear safety glasses or goggles and gloves. FIRST AID: If swallowed, do not induce vomiting. Get medical attention immediately. For eye contact, flush thoroughly with water for 15 min and get medical attention. For skin contact, wash thoroughly with soap and water. If inhaled, remove person to fresh air. If breathing does not improve, get medical attention.
Homax Knockdown Aerosol Wall Texture can also be used to apply this attractive decorative finish to an accent wall. Once applied, this heavy-bodied wall texture is knocked down using a drywall knife to achieve the finished look. Both professional contractors and DIYers can get the performance and results deserved with our popular aerosol texture products.
Features
- Water-based And Low Odor
- Adjusts To Spray Medium To Heavy Knockdown Textures
- Easy Cleanup
Directions
Homax Knockdown Texture Is The Fastest Way To Patch knockdown Drywall Textures. To Achieve The Best Results, Please Read The Following Directions Carefully Before You Begin Your Wall Repair Project.
Ventilate Area Well. Protect Surrounding Area From Overspray. Do Not Spray On Clothing, Furniture Or Carpet.
- Water-based, Use Warm Water For Cleanup.
- Sprays Best Between 68°F And 72°F.
Directions For Use: Make Any Necessary Wall Repairs Before Applying. For Best Results, Prime/seal Area Before And After Applying Texture.
1. Shake can Vigorously FOR ONE MINUTE Prior To Use.
2. Twist off Safety Tab From Nozzle.
3. Always Practice Spraying On Cardboard Or Scrap Drywall To Determine Preferred Pattern. Pointing Away From Face, Adjust Dial To Desired Pattern:
- Straight Up For Light Knockdown.
- Counterclockwise For Heavy Knockdown.
4. Spray Using A Circular Motion. For A Heavier Knockdown Pattern, Spray In Short Bursts To Build Up Texture. Shake Can Occasionally Throughout Use.
5. Allow Texture To Dry For 4 To 8 Min, Then Knockdown. Use Knockdown Or 6-8 Drywall Knife, Wet Blade, Hold Nearly Parallel To Surface And Draw Across Texture Applying Little To No Pressure. Dry Time: Allow To Dry 2-5 hr Before Painting (depending On Heaviness Of Pattern).
6. To Store : To Store, Clear Nozzle By Turning Can Upside Down And Spraying Until Texture Is Cleared.
Specification
- Size: 10 oz
- Packaging Type: Aerosol
Warning
Contains Nepheline Syenite, Calcium Silicate, Toluene, Acetone, Xylene, Titanium Dioxide, Ethylbenzene and Propane/Isobutane blend (propellant). Vapors may cause flash fire. Keep away from heat, sparks and flame. Extinguish all flames and sources of ignition during use and until all vapors are gone. Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation. May affect the brain or nervous system causing dizziness, headache or nausea. Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Store upright in a cool, dry place. Avoid prolonged exposure to sunlight and other heat sources that may cause bursting. Do not puncture, incinerate, burn or store above 120°F. Use with adequate ventilation. Avoid breathing vapor and spray mist. Avoid contact with eyes and skin. Wear safety glasses or goggles and gloves. FIRST AID: If swallowed, do not induce vomiting. Get medical attention immediately. For eye contact, flush thoroughly with water for 15 min and get medical attention. For skin contact, wash thoroughly with soap and water. If inhaled, remove person to fresh air. If breathing does not improve, get medical attention.
Related Products
