Raindrip Polyethylene Drip Irrigation Tubing - 5/8" X 50'

Build your drip system with durable tubing to transport water to your plants. 5/8" distribution tubing works as a main line to deliver water to an emitter or a feeder line; or punch emitters into side of tubing to distribute moisture along the line. The 5/8" supply tubing has an outside diameter (OD) of 0.700", internal diameter (ID) of 0.600". While other manufacturers use blended recycled material for their entire tubing, Raindrip poly tubing is constructed with an innovative layering method, using 100% virgin content for both inner and outer layers for a durability, and a middle layer of recycled content.

Use as a main supply line connected to a low-flow, drip-watering device, or punch emitters into the tubing to deliver water along the run.

Features

• Transport water in your drip irrigation system
• Use as a supply line connected to emitters and/or feeder lines
• Deliver water along the line with punched-in emitters
• Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets
• As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated
• Use as a main supply line connected to a low-flow, drip-watering device, or punch emitters into the tubing to deliver water along the run

Warranty

Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling.

What's Included

Comes with one 50' coil of 5/8". poly supply tubing.

Installation/Maintenance

• Periodically check for leaks or damage; once or twice a year, remove end closures and flush each circuit until the water runs clear; in cold climate areas, winterize by completely draining the system to prevent lines from damage or splitting
• To use as a main supply line, attach to a point-of-connection device connected to the water source; to use as a dripper line, attach emitters directly into the line
• Periodically check for leaks or damage; once or twice a year, remove end closures and flush each circuit until the water runs clear; in cold climate areas, winterize by completely draining the system to prevent lines from damage or splitting

Specifications

• Size: 5/8" X 50'