Devcon 2 Ton Flow Mix Epoxy - 0.47 oz

SKU: 754794

UPC: 078143231452

$5.49

$3.59

(You save $1.90 )

A clear, extremely strong, non-shrinking adhesive, specially formulated for moderate strength and water resistance. Apply mixed epoxy directly to your repair area. The flow-mix nozzle automatically mixes the hardener and resin together.

Features

Bonds are used Acrylic, China, Fiberglass, Metal, Wood, Concrete, Ceramic, Glass
Water-resistant

Tips and Tricks

Pull the plunger back slightly (1/8") to allow air bubbles to rise to the top so that you do not push air bubbles into the flow-mix nozzle
To get an even flow of resin and hardener, push down evenly on the plunger. Note; equal portions of the hardener and resin must be thoroughly mixed in order for this product to cure properly
Use painters or masking tape to protect any areas from unwanted epoxy exposure. Remove tape before the epoxy cures

Specifications

Handling Time: 30 min
Set Time: 30 min
Full Cure: 24 hr.
Temperature Range: -60°F to 180°F
Tensile Strength: 2500 psi
Color: Clear to Light Yellow
Size: 0.47 oz

Technical Sheet.pdf

More details

Features

Bonds are used Acrylic, China, Fiberglass, Metal, Wood, Concrete, Ceramic, Glass
Water-resistant

Tips and Tricks

Pull the plunger back slightly (1/8") to allow air bubbles to rise to the top so that you do not push air bubbles into the flow-mix nozzle
To get an even flow of resin and hardener, push down evenly on the plunger. Note; equal portions of the hardener and resin must be thoroughly mixed in order for this product to cure properly
Use painters or masking tape to protect any areas from unwanted epoxy exposure. Remove tape before the epoxy cures