Easy Care Premium Decor Fluorescent Spray Paint - 11 oz
SKU:
641969-P
UPC:
042909641380
$6.49 - $8.49
Superior interior/exterior flat, fluorescent, fast drying enamel spray at any angle, comfort spray tip.
Features
- Long-lasting vibrant color
- For use on wood, metal, crafts and markings
- Innovative 360° tip technology allows you to spray at any angle, even upside down
- Fast-drying
- For use on indoor and outdoor surfaces
Surface Prep
Remove all grease, oil, dirt, wax and rust scale from surface. On new clean surface no primer is necessary. For rusty metal surfaces prime with X-O Rust Primer. New galvanized surfaces must weather 6 months before priming. Use with adequate ventilation.
Application
Before spraying, shake can for 2 min after ball within begins to rattle and occasionally during use. Hold can 10" to 18" (25 to 45 cm) away from the surface and apply several thin coats a few minutes apart rather than one heavy coat, slightly overlapping each stroke. Keep can in motion while spraying. Recoat within one hour.
Clean-Up
Never stick sharp objects into the opening at the top of the can. For wet film, use mineral spirits. For dry film, use paint stripper, toluol or acetone.
Recommended Uses
For marking and crafts. Can be used on wood, metal, furniture, handcrafts and other paintable surfaces. Do not use on Styrofoam, ceramic tiles or marble.
Environmental Variables
Set to touch in 5-20 min. Tack free in 30-45 min. Recoat within one hour. High humidity or low temperature may increase dry time. Contains no CFC's which deplete the ozone layer.
Cautions
Contains propane, acetone and aromatic solvents. Extremely flammable. Storage and handling: Level-3 Aerosols. Do not use on Styrofoam, ceramic tiles or marble. Do not store at temperatures above 120°F (50°C). Protect unused product from freezing.
Dispose of aerosol container and unused contents in accordance with local, state and federal regulations. Do not burn, incinerate, puncture or place aerosol container in home garbage compactor.
Physical Properties
- VOCs: Max 65% & 1.30 pw MIR
- Flashpoint: <20º F
- Percent Solids By Weight: 35.21% + - 2
- Dry Time at 60º: 0-10
Specifications
- Finish: Matte
- Size: 11 oz
Superior interior/exterior flat, fluorescent, fast drying enamel spray at any angle, comfort spray tip.
Features
- Long-lasting vibrant color
- For use on wood, metal, crafts and markings
- Innovative 360° tip technology allows you to spray at any angle, even upside down
- Fast-drying
- For use on indoor and outdoor surfaces
Surface Prep
Remove all grease, oil, dirt, wax and rust scale from surface. On new clean surface no primer is necessary. For rusty metal surfaces prime with X-O Rust Primer. New galvanized surfaces must weather 6 months before priming. Use with adequate ventilation.
Application
Before spraying, shake can for 2 min after ball within begins to rattle and occasionally during use. Hold can 10" to 18" (25 to 45 cm) away from the surface and apply several thin coats a few minutes apart rather than one heavy coat, slightly overlapping each stroke. Keep can in motion while spraying. Recoat within one hour.
Clean-Up
Never stick sharp objects into the opening at the top of the can. For wet film, use mineral spirits. For dry film, use paint stripper, toluol or acetone.
Recommended Uses
For marking and crafts. Can be used on wood, metal, furniture, handcrafts and other paintable surfaces. Do not use on Styrofoam, ceramic tiles or marble.
Environmental Variables
Set to touch in 5-20 min. Tack free in 30-45 min. Recoat within one hour. High humidity or low temperature may increase dry time. Contains no CFC's which deplete the ozone layer.
Cautions
Contains propane, acetone and aromatic solvents. Extremely flammable. Storage and handling: Level-3 Aerosols. Do not use on Styrofoam, ceramic tiles or marble. Do not store at temperatures above 120°F (50°C). Protect unused product from freezing.
Dispose of aerosol container and unused contents in accordance with local, state and federal regulations. Do not burn, incinerate, puncture or place aerosol container in home garbage compactor.
Physical Properties
- VOCs: Max 65% & 1.30 pw MIR
- Flashpoint: <20º F
- Percent Solids By Weight: 35.21% + - 2
- Dry Time at 60º: 0-10
Specifications
- Finish: Matte
- Size: 11 oz
