Easy Care Premium Decor High Heat Spray Paint - 12 oz
SKU:
347534-P
UPC:
042909348456
$8.99
Superior interior/exterior high heat enamel spray at any angle, comfort spray tip. Takes heat up to 1000°F.
Features
- Provides a heat resistant finish of up to 1,000°
- Ideal for barbeque grills, wood stoves, boilers, radiators, heaters, firepits, fireplace screens, car engines and more
- Innovative 360° tip technology allows you to spray at any angle, even upside down
- For use on indoor and outdoor surfaces
- Superior durability and color retention after repeated heating
Surface Prep
Remove all grease, oil, dirt, wax and rust scale from surface. On new clean surface no primer is necessary. For rusty metal surfaces prime with X-O Rust Primer. New galvanized surfaces must weather 6M before priming. Use with adequate ventilation.
Application
Before spraying, shake can for 2 min after ball within begins to rattle and occasionally during use. Hold can 10" to 18" (25 to 45 cm) away from the surface and apply several thin coats a few minutes apart rather than one heavy coat, slightly overlapping each stroke. Keep can in motion while spraying. Recoat within one hour.
Recommended Uses
For interior or exterior surfaces such as barbecues, car engines, boilers, heaters, steam pipes and furnaces. Will not with-stand open flame. Do not use on Styrofoam, ceramic tiles or marble.
Environmental Variables
Flat White & Black: Set to touch in 20-50 min. Tack free in 3-4 hr. Aluminum set to touch in 5-10 min. Tack free in 10-30 min. Recoat within one hour. High humidity or low temperature may increase dry time. Contains no CFC’s which deplete the ozone layer.
Clean-up
Never stick sharp objects into the opening at the top of the can. For wet film, use mineral spirits. For dry film, use paint stripper, toluol or acetone.
Cautions
Contains propane, acetone and aromatic solvents. Extremely flammable. Storage and handling: Level-3 Aerosols. Do not use on Styrofoam, ceramic tiles or marble. Do not store at temperatures above 120°F (50°C). Protect unused product from freezing.
Dispose of aerosol container and unused contents in accordance with local, state and federal regulations. Do not burn, incinerate, puncture or place aerosol container in home garbage compactor.
Specifications
- Finish: Semi Gloss
- Size: 12 oz
- VOCs Max: 80% & 1.85 pw MIR
- Flashpoint: < 20ºF
- Percent solids by weight: 22.40% + - 2 PDS 1550
- Dry Time: 60º White & Flat Black: 0-10
Superior interior/exterior high heat enamel spray at any angle, comfort spray tip. Takes heat up to 1000°F.
Features
- Provides a heat resistant finish of up to 1,000°
- Ideal for barbeque grills, wood stoves, boilers, radiators, heaters, firepits, fireplace screens, car engines and more
- Innovative 360° tip technology allows you to spray at any angle, even upside down
- For use on indoor and outdoor surfaces
- Superior durability and color retention after repeated heating
Surface Prep
Remove all grease, oil, dirt, wax and rust scale from surface. On new clean surface no primer is necessary. For rusty metal surfaces prime with X-O Rust Primer. New galvanized surfaces must weather 6M before priming. Use with adequate ventilation.
Application
Before spraying, shake can for 2 min after ball within begins to rattle and occasionally during use. Hold can 10" to 18" (25 to 45 cm) away from the surface and apply several thin coats a few minutes apart rather than one heavy coat, slightly overlapping each stroke. Keep can in motion while spraying. Recoat within one hour.
Recommended Uses
For interior or exterior surfaces such as barbecues, car engines, boilers, heaters, steam pipes and furnaces. Will not with-stand open flame. Do not use on Styrofoam, ceramic tiles or marble.
Environmental Variables
Flat White & Black: Set to touch in 20-50 min. Tack free in 3-4 hr. Aluminum set to touch in 5-10 min. Tack free in 10-30 min. Recoat within one hour. High humidity or low temperature may increase dry time. Contains no CFC’s which deplete the ozone layer.
Clean-up
Never stick sharp objects into the opening at the top of the can. For wet film, use mineral spirits. For dry film, use paint stripper, toluol or acetone.
Cautions
Contains propane, acetone and aromatic solvents. Extremely flammable. Storage and handling: Level-3 Aerosols. Do not use on Styrofoam, ceramic tiles or marble. Do not store at temperatures above 120°F (50°C). Protect unused product from freezing.
Dispose of aerosol container and unused contents in accordance with local, state and federal regulations. Do not burn, incinerate, puncture or place aerosol container in home garbage compactor.
Specifications
- Finish: Semi Gloss
- Size: 12 oz
- VOCs Max: 80% & 1.85 pw MIR
- Flashpoint: < 20ºF
- Percent solids by weight: 22.40% + - 2 PDS 1550
- Dry Time: 60º White & Flat Black: 0-10
