Zoom the image with the mouse
Frost King Crystal Clear Indoor Shrink Window Kit
SKU:
895915-P
UPC:
077578018195
$6.99
Kits feature a crystal clear plastic sheet that shrinks tight and wrinkle-free with an ordinary handheld hairdryer. The kits can be easily installed on metal, painted, varnished wood or vinyl clad window frames with the double-face tape or nails provided.
Kits are available for basement windows, standard windows, extra large and picture windows and patio doors.
Features
- Low cost insulation and draft seal solutionto save up to 35% or heatloss
- Easily installs crystal clear with standard hair dryer, individually sized to fit 3 standard windows
Preparation
Be sure the surface is clean, dry, and grease-free. Install only on metal, painted wood or vinyl. Do not apply to wallpaper, wallboard, plaster or veneer surfaces.
Installation
- Apply tape firmly around the window frame and along the bottom sill. Remove backing paper.
- Apply film slightly taut first across the top, then bottom and both sides, leaving at least 1 overhang around the edge. Pull and stretch film to smooth out any wrinkles.
- Smooth and eliminate remaining wrinkles with a hairdryer set at the highest setting (hold dryer 4-6 away from film). Trim excess film from around the frame.
Specifications
- Material: Plastic
- Color: Clear
Additional Information
3 pk
- 42" X 62"
9 pk
- 42" X 62"
1 pk
- 62" X 210"
1 pk
- 84" X 110"
Kits feature a crystal clear plastic sheet that shrinks tight and wrinkle-free with an ordinary handheld hairdryer. The kits can be easily installed on metal, painted, varnished wood or vinyl clad window frames with the double-face tape or nails provided.
Kits are available for basement windows, standard windows, extra large and picture windows and patio doors.
Features
- Low cost insulation and draft seal solutionto save up to 35% or heatloss
- Easily installs crystal clear with standard hair dryer, individually sized to fit 3 standard windows
Preparation
Be sure the surface is clean, dry, and grease-free. Install only on metal, painted wood or vinyl. Do not apply to wallpaper, wallboard, plaster or veneer surfaces.
Installation
- Apply tape firmly around the window frame and along the bottom sill. Remove backing paper.
- Apply film slightly taut first across the top, then bottom and both sides, leaving at least 1 overhang around the edge. Pull and stretch film to smooth out any wrinkles.
- Smooth and eliminate remaining wrinkles with a hairdryer set at the highest setting (hold dryer 4-6 away from film). Trim excess film from around the frame.
Specifications
- Material: Plastic
- Color: Clear
Additional Information
3 pk
- 42" X 62"
9 pk
- 42" X 62"
1 pk
- 62" X 210"
1 pk
- 84" X 110"
