Gorilla Foam Seal Insulating Foam Sealant - 12 oz
Gorilla Foam Seal Insulating Foam Sealant is a Multi-Purpose Formula that expands to fill gaps & cracks up to 1" does not cause bowing making it great for windows & doors and can be used in both indoor & outdoor applications. This formula has maximum durability with high flexibility, strong adhesion and UV resistance that provides protection for minimal outdoor degradation. Dispensed product is tack free in 8-12 min and can be trimmed in 45 min. Use to seal out air, moisture, pests and insects. Exposure to sunlight causes discoloration. For outdoor use, coat with exterior paint. Not for filling closed cavities or voids. Not for use on or within heat-emitting devices or in areas that require fireproof and/or fire stopping materials.
Features
- Seals out air, moisture, pests & insects
- Reduces drafts for energy efficiency
- Maximum durability - high density, flexible, strong adhesion & UV resistant
- Fast dry
- 1 can replaces 30 cartridges
- No warp, No bow
- No shrinkage, maximum seal
Sandable & Paintable
Great For
Filling Gaps & Cracks; Insulating Windows & Doors; Sealing out Air, Moisture, Pests, & Insects; and Reducing Drafts for Energy Efficiency.
Use on
Wood, Metal, Glass, Masonry, Plumbing, HVAC, Electrical, Basements, Crawlspaces, Attics, Ceilings, Skylights and more! Do not use inside electrical outlets or junction boxes. Not for filling closed cavities or voids. Not for use on or within heat-emitting devices or in areas that require fireproof and/or firestopping materials.
Direction
- Always wear eye protection, gloves and proper work clothing when using foam. Cured foam is difficult to remove from skin, clothing and other substrates
- Prep areas by thoroughly cleaning
- Shake can for 60 seconds and immediately attach the straw applicator
- Test dispense pressure/foam expansion in an area separate from your project
- When applying foam, only fill crevice up to 40% as foam will continue to expand after dispensed
- Foam will be tack free in 8-12 min, can be cut after 45 min and fully cures in 8 hr
- Once cured, trim excess foam. Cured foam can be trimmed, sanded and painted. Do not leave cured foam in direct sunlight without painting
Note
Before use store upright in a cool, dry place. After use product may continue to expand out of the straw. Not intended for reuse. Cure time may vary depending on temperature and humidity.
Specification
- Size: 12 oz
- Application temperature: 50° to 77°F (10° to 25°C)
- Service temperature: -58° to 194°F (-50° to 90°C)
- Outdoor: Yes. Exposure to sunlight causes discoloration. Do not leave cured foam in direct sunlight without painting
- Moisture resistant: Yes
- Paintable: Yes
- Sandable: Yes
- Stainable: No
- Cured color: Gray
- Technical standards: Meets AAMA 812-19, UL classified
Gorilla Foam Seal Insulating Foam Sealant is a Multi-Purpose Formula that expands to fill gaps & cracks up to 1" does not cause bowing making it great for windows & doors and can be used in both indoor & outdoor applications. This formula has maximum durability with high flexibility, strong adhesion and UV resistance that provides protection for minimal outdoor degradation. Dispensed product is tack free in 8-12 min and can be trimmed in 45 min. Use to seal out air, moisture, pests and insects. Exposure to sunlight causes discoloration. For outdoor use, coat with exterior paint. Not for filling closed cavities or voids. Not for use on or within heat-emitting devices or in areas that require fireproof and/or fire stopping materials.
Features
- Seals out air, moisture, pests & insects
- Reduces drafts for energy efficiency
- Maximum durability - high density, flexible, strong adhesion & UV resistant
- Fast dry
- 1 can replaces 30 cartridges
- No warp, No bow
- No shrinkage, maximum seal
Sandable & Paintable
Great For
Filling Gaps & Cracks; Insulating Windows & Doors; Sealing out Air, Moisture, Pests, & Insects; and Reducing Drafts for Energy Efficiency.
Use on
Wood, Metal, Glass, Masonry, Plumbing, HVAC, Electrical, Basements, Crawlspaces, Attics, Ceilings, Skylights and more! Do not use inside electrical outlets or junction boxes. Not for filling closed cavities or voids. Not for use on or within heat-emitting devices or in areas that require fireproof and/or firestopping materials.
Direction
- Always wear eye protection, gloves and proper work clothing when using foam. Cured foam is difficult to remove from skin, clothing and other substrates
- Prep areas by thoroughly cleaning
- Shake can for 60 seconds and immediately attach the straw applicator
- Test dispense pressure/foam expansion in an area separate from your project
- When applying foam, only fill crevice up to 40% as foam will continue to expand after dispensed
- Foam will be tack free in 8-12 min, can be cut after 45 min and fully cures in 8 hr
- Once cured, trim excess foam. Cured foam can be trimmed, sanded and painted. Do not leave cured foam in direct sunlight without painting
Note
Before use store upright in a cool, dry place. After use product may continue to expand out of the straw. Not intended for reuse. Cure time may vary depending on temperature and humidity.
Specification
- Size: 12 oz
- Application temperature: 50° to 77°F (10° to 25°C)
- Service temperature: -58° to 194°F (-50° to 90°C)
- Outdoor: Yes. Exposure to sunlight causes discoloration. Do not leave cured foam in direct sunlight without painting
- Moisture resistant: Yes
- Paintable: Yes
- Sandable: Yes
- Stainable: No
- Cured color: Gray
- Technical standards: Meets AAMA 812-19, UL classified