Gorilla Waterproof Patch & Seal Rubberized Sealant Paste - 1 lb
Gorilla Waterproof Patch & Seal Paste is a thick, flexible rubberized sealant paste that clings to multiple surfaces to instantly fill large gaps, cracks & holes. Once applied, the high strength formula smoothly covers the surface tightly sealing out water, air and moisture, resulting in lasting repairs!
Features
- Stops & prevents leaks
- Instantly seals out water, air and moisture
- Spreadable to fill large gaps, cracks, & holes
- Flexible & paintable
- Shrink & mildew resistant
- Tight seal container for long shelf life & reusability
- High strength formula
- Seals out water, air & moisture
- Spreadable to fill large gaps
Direction
- Clean surface of dirt, dust, grease and oil
- Using putty knife or trowel, apply to the surface. Ensure surface is completely covered and all gaps and holes have been filled
- Allow to cure in between coats. Full cure at 24-48 hr
Note
Slight skinning may occur inside can if lid is not sealed tight. If present, remove skinned material to continue use and secure lid immediately after use.
Storage
Remove excess product from the rim of can with a dry cloth. Press or lightly tap lid shut to create tight seal.
Dry Time
Paste begins to cure once exposed to air & moisture and will skin in 15 to 30 min. Full cure at 24-48 hr
Clean up
Wipe up any unwanted material with a dry cloth or paper towel immediately. Use mineral spirits to clean applicators such as putty knife or trowel.
Storage Tips
Press or lightly tap lid shut to create tight seal. A loose seal may allow product to slightly skin over inside can. If this happens, scrape off skin with putty knife and use rest of contents. Store in dry, room temperature conditions.
Specification
- Size: 1 lb
- Application Temperature: 40°F to 120°F (5°C to 49°C)
- Service Temperature: –40°F to 212°F (-40°C to 100°C)
- Outdoor: Yes
- Moisture Resistant: Yes
- Paintable: Yes
- Sandable: Yes
- Stainable: No
- Expands When Cured: No
- Gap Filling: Yes, up to 3"
Gorilla Waterproof Patch & Seal Paste is a thick, flexible rubberized sealant paste that clings to multiple surfaces to instantly fill large gaps, cracks & holes. Once applied, the high strength formula smoothly covers the surface tightly sealing out water, air and moisture, resulting in lasting repairs!
Features
- Stops & prevents leaks
- Instantly seals out water, air and moisture
- Spreadable to fill large gaps, cracks, & holes
- Flexible & paintable
- Shrink & mildew resistant
- Tight seal container for long shelf life & reusability
- High strength formula
- Seals out water, air & moisture
- Spreadable to fill large gaps
Direction
- Clean surface of dirt, dust, grease and oil
- Using putty knife or trowel, apply to the surface. Ensure surface is completely covered and all gaps and holes have been filled
- Allow to cure in between coats. Full cure at 24-48 hr
Note
Slight skinning may occur inside can if lid is not sealed tight. If present, remove skinned material to continue use and secure lid immediately after use.
Storage
Remove excess product from the rim of can with a dry cloth. Press or lightly tap lid shut to create tight seal.
Dry Time
Paste begins to cure once exposed to air & moisture and will skin in 15 to 30 min. Full cure at 24-48 hr
Clean up
Wipe up any unwanted material with a dry cloth or paper towel immediately. Use mineral spirits to clean applicators such as putty knife or trowel.
Storage Tips
Press or lightly tap lid shut to create tight seal. A loose seal may allow product to slightly skin over inside can. If this happens, scrape off skin with putty knife and use rest of contents. Store in dry, room temperature conditions.
Specification
- Size: 1 lb
- Application Temperature: 40°F to 120°F (5°C to 49°C)
- Service Temperature: –40°F to 212°F (-40°C to 100°C)
- Outdoor: Yes
- Moisture Resistant: Yes
- Paintable: Yes
- Sandable: Yes
- Stainable: No
- Expands When Cured: No
- Gap Filling: Yes, up to 3"