Kilz 2 All-purpose Multi-surface Sealer & Stainblocker - 1 qt

New Name, Same Trusted Formula! KILZ 2 All-purpose (Previously KILZ 2 Latex) Is A Fast Drying, Water-based, Multi-surface Primer-sealer-stain Blocker With Excellent Adhesion, Mildew Resistance, Sealing Properties And Very Mild Odor. KILZ 2 All-purpose Primer Blocks Medium Stains Including Minor Water Stains, Rust, Grease, Ink, Pencil And Felt Marker. Enhanced Hiding Makes It Ideal For Changing Colors And Helps Lessen The Number Of Coats Of Paint Required. Use On Interior And Exterior Surfaces Including Woodwork, Drywall, Plaster, Paneling, Masonry, Brick, Painted Metal And Properly Prepared Glossy Surfaces. Use Under Or Over Water-based Or Oil-based Paints. Not Recommended On Flooring.

Features

• Seals Porous Surface
• Promotes Adhesion
• Helps Block Light/medium Stains
• Hides Previous Color
• Mildew Resistant Finish

Surface Preparation

• All Surfaces Must Be Clean, Free Of Dust, Chalk, Oil, Grease, Wax, Polish, Mold And Mildew, Loose Peeling Paint, Rust And All Other Foreign
  Substances
• If Washing Is Necessary, Use A Non-soapy Detergent Or A Tsp Substitute, Rinse Well And Allow To Dry
• Unpainted, Exterior Wood Exposed To Sun And/or Moisture Longer Than 2-4 Weeks Must Be Cleaned And Sanded Before Priming
• Glossy Surfaces: For Maximum Adhesion, Scuff Sand The Surface Thoroughly Before Priming
• Peeling Or Checked Paint: Scrape Off Loose Paint And Sand To A Smooth Surface
• Mold Or Mildew Covered Surfaces: Wash The Area With A Mildew Remover, Rinse With Water And Allow To Dry Before Priming
• Masonry, Brick, Stucco And Plaster: KILZ 2 All-purpose Primer May Be Used On Clean, Dry, Aged Masonry Surfaces. New Masonry Must Be Allowed To Cure (dry) At Least 30 Days Before Applying KILZ 2 All-purpose Primer
• Fire Restoration: It Is Critical To Clean Damaged Surfaces Thoroughly Before Priming. Primer Recommendations: Water-based Primers Such As KILZ Restoration Or Oil-based Primers Such As KILZ Original (interior Use) Or KILZ Original Exterior

Application

• Eye Protection Is Recommended. For Spray Applications, A Small Amount Of Water (no More Than 1/2 Pt Per Gal) May Be Added
• Do Not Thin For Stainblocking Applications. Only Apply If Surface, Air And Product Temperatures Are Between 50°-90°F(10°-32°C)
• Stir Thoroughly Before And Occasionally During Use
• Brush - High-quality Nylon/polyester
• Roller - High Quality 3/8-1/2" Nap On Smooth Surfaces Or 1/2-3/4" Nap On Semi-rough Or Porous Surfaces
• Airless Spray- 0.017 - 0.021 Tip/60 Mesh Filter
• Prime The Entire Surface To Ensure A Uniform Appearance Of The Topcoat
• Stainblocking: KILZ 2 All-purpose Primer Is Formulated To Block Light Or Medium Stains. For Heavy Stains Use Oil Based Primers Such As KILZ Original And KILZ Original Exterior Or Water-based Primers Such As KILZ Restoration And KILZ Premium.
• Tinting: KILZ 2 All-purpose Primer May Be Tinted With Up To 2 Oz Of Universal Colorant Per Gal Tinting To A Lighter Shade Than The Topcoat Is Recommended
• Coverage: 300-400 Sq. Ft. Per Gal Depending On Application Method And Surface Porosity

Dry Time At 77°F(25°C), 50% RH

• Dries To The Touch In 30 Minutes
• Can Be Recoated Or Topcoated In One Hour With Latex Or Oil-based Paint
• Application At Lower Temperatures, In High Humidity Or In Poorly Ventilated Areas Will Affect Dry Time

Clean Up & Disposal

• Clean Equipment And Paint Spatters With Warm, Soapy Water
• Do Not Dispose Of This Product Down A Drain. Please Consider Donating Any Unused Product
• If Spilled, Contain Material And Remove With An Inert Absorbent. Dispose Of Contaminated Absorbent, Container And Unused Product In
  accordance With All Current Federal, State And Local Regulations

Caution

Avoid Contact With Eyes. May Cause Eye, Nose And Throat Irritation. Avoid Breathing Of Dust, Vapors Or Spray Mist. Open Windows And Doors Or Use Other Means To Ensure Fresh Air Entry During Application And Drying. If You Experience Eye Watering, Headache Or Dizziness Or If Air Monitoring Demonstrates Vapor/ Mist Levels Are Above Applicable Limits, Wear An Appropriate, Properly Fitted Respirator (NIOSH/MSHA TC -23C Or Equivalent) During And After Application. Follow Respirator Manufacturer's Directions For Respirator Use. Close Container After Each Use. Wash Thoroughly After Handling And Before Smoking Or Eating.

Warning

If You Scrape, Sand or Remove Old Paint, You May Release Lead Dust. Lead Is Toxic. Exposure To Lead Dust Can Cause Serious Illness, Such As Brain Damage, Especially In Children. Pregnant Women Should Also Avoid Exposure. Wear A NIOSH-approved Respirator To Control Lead Exposure. Clean Up Carefully With A HEPA Vacuum And A Wet Mop.

Specifications

• Color: White
• Size: 1 Qt
• Base: Water
• Coverage - Low: 300 Sq. Ft.
• Mils Wet: 5.3
• Mils Dry: 1.7
• Coverage - High: 400 Sq. Ft.
• Mils Wet: 4
• Mils Dry: 1.3
• Finish @ 85°: <10
• Application Temperature (min): 50°F (10°C)
• Application Temperature (max): 90°F(32°C)
• Viscosity: 95 - 105 KU
• Dry To Touch: 30 Minutes
• Dry To Recoat: 1 Hr
• Max Tint: 2 Oz
• VOC: <50g/L
• Brush: Nylon/Poly
• Roller - Smooth Surface: 3/8" - 1/2" Nap
• Roller - Porous Surface: 1/2" - 3/4" Nap
• Spray Tip: 0.017" - 0.021"
• Spray Filter: 60 Mesh
• Spray Pressure: 2,500 - 3,200
• Volume Solids: 34.00%
• Weight Solids: 48.50%
• Certification: ASTM D522, ASTM D3274, UL, EPD
• Warranty: Lifetime Limited Warranty

Safety Data Sheet.pdf

Technical Sheet.pdf

Certificate.pdf