Mag 1 Dot 3 Brake Fluid

Featuring FMX Technology that provides unsurpassed protection and performance. Specially blended formula that meets or exceeds the highest standards of performance and safety for a DOT 3 fluid. For all disc and drum brake systems, including ABS, in which a DOT 3 fluid is recommended. Complies with Federal Motor Vehicle Safety Standard 116. Surpasses SAE Spec. J1703. Minimum Wet Boiling Point 284°F (140°C).

Evolutionary Performance

OEMs continue to evolve engine and vehicle systems. One brand has evolved right alongside Mag 1. Only the most advanced automotive fluids meet the difficult challenges of effectively balancing performance, strength and durability.

Powerful Chemistry and Performance

Mag 1 helps improve your vehicle longevity and performance.

Specifications

• Chemical stability°C change, maximum: -1°C(-2°F)
• Compatibility: Sedimentation at 40°C, vol. % max: 0
• Corrosion weight change, mg/cm2, max.Aluminum: 0
• Corrosion weight change, maximum.brass: 0.04 mg/cm2
• Corrosion weight change, mg/cm2, max.Cast Iron: 0
• Corrosion weight change, maximum.copper: 0.05 mg/cm2
• Corrosion weight change, mg/cm2, max.Steel: 0
• Decrease in hardness of rubber cups at 70°C, IRHD,maximum: 6
• Corrosion weight change, mg/cm2, max. Tinned Iron: 0.00
• Equilibrium reflex boiling Point, minimum: 255°C (492°F)
• High temperature stability, °C change,maximum: -1°C(-2°F)
• Increase in base diameter of rubber cup at 70°C, mm: 0.015
• Kinematic viscosity, at 100°C, minimum: 2.1 cSt
• Kinematic viscosity, at -40°C: 1189 cSt
• Wet equilibrium reflex boiling point, minimum: 151°C (304°F)