Minwax Clear Gloss Wipe-On Poly

Minwax Wipe-On Poly Is A Durable, Clear Finish That Combines Polyurethane Protection With Classic, Hand-rubbed Beauty.

Features

• Applied With A Cloth. No Need To Worry About Drips And Brush Marks
• Great For Furniture, Railings, And Trim

Directions

• The Surface Must Be Dry And Free Of Wax, Grease, Polish, Old Finishes In Poor Condition, Or Any Foreign Matter.
• Sand To Obtain A Smooth, Uniform Surface. Remove All Dust.
• If Desired, Apply The Stain, Such As Minwax Wood Finish Stain, To Unfinished Interior Wood Surfaces. Follow Directions For Application Instructions And Dry Times.
• Shake Minwax Wipe-On Poly Container Thoroughly Before And During Use To Eliminate Settling On The Bottom Of The Can.
• Apply A Liberal Amount Of Wipe-On Poly To A Clean, Soft, Lint-free Cloth And Rub It Into The Wood.
• Let Dry 2-3 Hours. Then Lightly Sand The Entire Surface With Fine Sandpaper (220 Grit) To Ensure An Even Finish And Proper Adhesion. Remove All Dust.
• Apply A Second Coat. If A Third Coat Is Desired, Repeat Step 6 Before Application.
• After The Final Coat, Allow 24 Hours Before Light Use.

Warning

Removal Of Old Paint By Sanding, Scraping Or Other Means May Generate Dust Or Fumes That Contain Lead. Exposure To Lead Dust Or Fumes May Cause Brain Damage Or Other Adverse Health Effects, Especially In Children Or Pregnant Women. Controlling Exposure To Lead Or Other Hazardous Substances Requires The Use Of Proper Protective Equipment Such As A Properly Fitted Respirator (NIOSH Approved) And Proper Containment And Cleanup.

Specifications

• Sheens: Clear Gloss
• Application Tool: Lint-free Cloth
• Location: Interior Wood Surfaces
• Recoat: After 2-3 Hr
• Dry Time: 24 Hrs Before Normal Use
• Cleanup: Mineral Spirits Or Paint Thinner
• Coverage: 125' Sq/quart
• Coats: 2-3
• Recommended Uses: Furniture, Cabinets, Woodwork, Trim, Doors; Small Floor Touch-ups (scratches)