Minwax Clear Polycrylic Semi-Gloss Protective Finish - 1 gal
SKU:
873513
UPC:
027426144446
$69.99
Minwax Polycrylic Protective Finish Is A Crystal Clear, Ultra Fast-drying Protective Topcoat.
Features
- Protects And Adds Beauty To Interior Wood Surfaces Including Woodwork, Furniture, Doors And Cabinets
- Crystal Clear Finish Is Ideal For Use Over Light Woods Like Maple, Ash And Birch As Well As Over Minwax Water-Based Wood Stains
- Dries Quickly
- Cleans Up Easily With Warm Water
Directions
- Surface Must Be Dry And Free Of Wax, Grease, Polish, Old Finishes In Poor Condition Or Any Foreign Matter.
- Sand To A Smooth, Uniform Surface. Do Not Use Steel Wool. Remove Dust With A Damp Cloth. Let Dry Completely.
- If Desired, Apply Stain Such As Minwax Water Based Wood Stain Or Minwax Wood Finish Stain To Bare Wood Surfaces Following Label Directions. Wait At Least 24 Hours Before Applying Polycrylic Finish Over Minwax Wood Finish Stain.
- Stir Well Before And Regularly During Use. Do Not Shake. Finish Appears Mikly In Can But Dries Crystal Clear.
- Apply A Thin Coat Of Polycrylic Finish With A High-quality Synthetic Bristle Brush. Apply In One Direction With The Grain. Do Not Over-brush.
- Let Dry At Least 2 Hours Then Sand With Very Fine Sandpaper (220 Grit) To Ensure An Even Finish And Proper Adhesion Of Additional Coats. Do Not Use Steel Wool. Remove All Dust.
- Apply A Second Coat. For Additional Coats, Repeat Step 6 Before Applying. Three Coats Are Recommended.
- After The Final Coat, Allow 3 Hours Before Light Handling And 24 Hours Before Normal Use.
Specification
- Size: 1 Gal
- Color: Clear
- Sheens: Semi-gloss
- Application Tool: Synthetic Bristle Brush
- Location: Interior Wood Surfaces
- Recoat: After 2 Hr
- Dry Time: 3 Hr For Light Handling, 24 Hr For Normal Use
- Cleanup: Soap And Warm Water
- Coverage: 125' Sq/quart
- Coats: 2-3
- VOC Content: Maximum VOC Of 275 G/L
- Recommended Uses: Woodwork, Furniture, Cabinets, Doors, Not Recommended For Floors
- Warning: Removal Of Old Paint By Sanding, Scraping Or Other Means May Generate Dust Or Fumes That Contain Lead. Exposure To Lead Dust Or Fumes May Cause Brain Damage Or Other Adverse Health Effects, Especially In Children Or Pregnant Women. Controlling Exposure To Lead Or Other Hazardous Substances Require The Use Of Proper Protective Equipment Such As A Properly Fitted Respirator (NIOSH Approved) And Proper Containment And Cleanup. For More Information, Call The National Lead Information Center At 1-800-424-LEAD (in US) Or Contact Your Local Health Authority.
Minwax Polycrylic Protective Finish Is A Crystal Clear, Ultra Fast-drying Protective Topcoat.
Features
- Protects And Adds Beauty To Interior Wood Surfaces Including Woodwork, Furniture, Doors And Cabinets
- Crystal Clear Finish Is Ideal For Use Over Light Woods Like Maple, Ash And Birch As Well As Over Minwax Water-Based Wood Stains
- Dries Quickly
- Cleans Up Easily With Warm Water
Directions
- Surface Must Be Dry And Free Of Wax, Grease, Polish, Old Finishes In Poor Condition Or Any Foreign Matter.
- Sand To A Smooth, Uniform Surface. Do Not Use Steel Wool. Remove Dust With A Damp Cloth. Let Dry Completely.
- If Desired, Apply Stain Such As Minwax Water Based Wood Stain Or Minwax Wood Finish Stain To Bare Wood Surfaces Following Label Directions. Wait At Least 24 Hours Before Applying Polycrylic Finish Over Minwax Wood Finish Stain.
- Stir Well Before And Regularly During Use. Do Not Shake. Finish Appears Mikly In Can But Dries Crystal Clear.
- Apply A Thin Coat Of Polycrylic Finish With A High-quality Synthetic Bristle Brush. Apply In One Direction With The Grain. Do Not Over-brush.
- Let Dry At Least 2 Hours Then Sand With Very Fine Sandpaper (220 Grit) To Ensure An Even Finish And Proper Adhesion Of Additional Coats. Do Not Use Steel Wool. Remove All Dust.
- Apply A Second Coat. For Additional Coats, Repeat Step 6 Before Applying. Three Coats Are Recommended.
- After The Final Coat, Allow 3 Hours Before Light Handling And 24 Hours Before Normal Use.
Specification
- Size: 1 Gal
- Color: Clear
- Sheens: Semi-gloss
- Application Tool: Synthetic Bristle Brush
- Location: Interior Wood Surfaces
- Recoat: After 2 Hr
- Dry Time: 3 Hr For Light Handling, 24 Hr For Normal Use
- Cleanup: Soap And Warm Water
- Coverage: 125' Sq/quart
- Coats: 2-3
- VOC Content: Maximum VOC Of 275 G/L
- Recommended Uses: Woodwork, Furniture, Cabinets, Doors, Not Recommended For Floors
- Warning: Removal Of Old Paint By Sanding, Scraping Or Other Means May Generate Dust Or Fumes That Contain Lead. Exposure To Lead Dust Or Fumes May Cause Brain Damage Or Other Adverse Health Effects, Especially In Children Or Pregnant Women. Controlling Exposure To Lead Or Other Hazardous Substances Require The Use Of Proper Protective Equipment Such As A Properly Fitted Respirator (NIOSH Approved) And Proper Containment And Cleanup. For More Information, Call The National Lead Information Center At 1-800-424-LEAD (in US) Or Contact Your Local Health Authority.