Minwax Helmsman Indoor/Outdoor Spar Urethane - Semi-gloss

Minwax Helmsman Spar Urethane Is Specially Formulated As A Protective Clear Finish For Exterior Or Interior Wood Exposed To Sunlight, Water or Temperature Changes.

Features

• Contains UV Blockers To Reduce The Sun's Graying And Fading Effects
• Forms A Protective Barrier Against Rain And Moisture
• Special Oils Allow The Finish To Expand And Contract With The Wood As Seasons And Temperatures Change
• Ideal For Use On Doors, Windows, Trim, Bathroom Cabinets, Bar Tops, Kitchen Countertops, Outdoor Furniture

Recommended Uses

• Doors, Windows, Trim, Bathroom Cabinets, Bar Tops, Kitchen Countertops, Outdoor Furniture, Not Recommended For Floors.

Directions

• Surface Must Be Dry And Free Of Paint, Wax, Grease, Polish, Old Finishes In Poor Condition Or Any Foreign Matter
• Sand To Obtain A Smooth, Uniform Surface. Remove All Dust With A Damp Cloth
• If Desired, Apply Stain, Such As Minwax Wood Finish, To Unfinished Interior Wood Surfaces. Follow Directions For Application Instructions And Dry Times
• Stir Well Before And Occasionally During Use
• Apply A Thin Coat Of Helmsman Spar Urethane Using A High Quality Natural Bristle Brush. On Unfinished Wood, Apply Sufficient Material To Seal Open Joints, Edges And End-grain
• Let Dry At Least Four Hours, Then Sand Entire Surface Lightly With Very Fine Sandpaper (220 Grit) To Ensure An Even Finish And Proper Adhesion Of Additional Coats
• Apply Second Coat. If A Third Coat Is Desired, Repeat Step 6 Before Applying. Note: For Exterior Surfaces Or For Previously Unfinished Wood, Three Coats Are Recommended
• After Final Coat, Allow 24 Hours Before Normal Use

Cleanup

For Easy Clean-up Use Mineral Spirits Or Paint Thinner.

Coverage

Approximately 125 Sq. Ft. Per Qt.

Warning

Removal Of Old Paint By Sanding, Scraping Or Other Means May Generate Dust Or Fumes That Contain Lead. Exposure To Lead Dust Or Fumes May Cause Brain Damage Or Other Adverse Health Effects, Especially In Children Or Pregnant Women. Controlling Exposure To Lead Or Other Hazardous Substances Requires The Use Of Proper Protective Equipment Such As A Properly Fitted Respirator (NIOSH Approved) And Proper Containment And Cleanup.

Specifications

• Size: 11.5 Oz
• Sheens: Semi-Gloss
• Application Tool: Natural Bristle Brush
• Location: Interior And Exterior Wood Surfaces
• Recoat: After 4 Hours
• Dry Time: 24 Hours Before Normal Use
• Cleanup: Mineral Spirits
• Coverage: 125 Sq.ft Per Qt
• Coats: 3