Minwax Stainable Wood Filler - 1 oz
Minwax Stainable Wood Filler Is Ideal For Repairing Cracks, Small Gouges, Nail Holes, Knot Holes And Other Defects In All Types Of Unfinished Indoor And Outdoor Wood Surfaces.
- Stainable Wood Filler Is Specially Formulated To Accept Minwax Penetrating Wood Stains
- It Is Designed For Use With Oil-based And Water-based Wood Stains
Preparations
Surface Must Be Clean, Dry, And Free Of Dirt, Grease, Oil And Lose Particles. For Rotted Wood Use Minwax Wood Hardener To Strengthen Wood Fibers Before Applying Minwax Stainable Wood Filler. This Product Should Not Be Used On Holes Larger Than 3/4". For Larger Holes Use, Minwax High-Performance Wood Filler.
Application
- Squeeze A Liberal Amount Of Minwax Stainable Wood Filler Into The Area To Be Filled And Press Firmly Into Place, Using A Putty Knife. Fill Slightly Above The Surface To Allow For Sanding While Minimizing Overspreading On Surrounding Areas. Remove Excess
- Allow The Filler To Dry Completely. Dry Time Will Vary Depending On The Depth Of Area To Be Filled. Most Common Shallow Repairs Will Dry Within 2 Hours. For Deeper Holes, Fill In Layers 1/4" At A Time, Which May Require 2-6 Hours To Dry
- Sand Filler Smooth And Flush To The Wood. Remove All Sanding Residue Before Staining, Top Coating Or Painting
Staining And Finishing
Before Filling, Test Stain On Scrap Wood With Filler. Choose A Minwax Penetrating Stain, Such As, Minwax Wood Finish, Minwax Water-Based Stain Or Minwax Gel Stain And Apply According To The Label Directions. After Staining For Interior Use, Apply A Protective Clear Finish Such As Minwax Fast-Drying Polyurethane Or Minwax Polycrylic Protective Finish For Long-lasting Beauty And Protection. For Exterior Use, Apply A Protective Finish Such As Minwax Helmsman Spar Urethane. Minwax Stainable Wood Filler Can Also Be Directly Top Coated With A Clear Finish Or Painted.
Specifications
- Size: 1 Oz
- Application Tool: Putty Knife
- Dry Time: 2-6 Hours, Depending On Size Of The Area Filled
- Cleanup: Soap And Water
- Recommended Uses: For Filling Cracks, Small Gouges, Nail Holes, Knot Holes And Other Defects In Unfinished Wood
- Stain Application: As Soon As Wood Filler Has Dried And Is Sanded
- Cautions: Avoid Contact With Eyes And Skin. Wash Hands After Using. Keep Container Closed When Not In Use. Do Not Transfer Contents To Other Containers For Storage
- Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer.
Minwax Stainable Wood Filler Is Ideal For Repairing Cracks, Small Gouges, Nail Holes, Knot Holes And Other Defects In All Types Of Unfinished Indoor And Outdoor Wood Surfaces.
- Stainable Wood Filler Is Specially Formulated To Accept Minwax Penetrating Wood Stains
- It Is Designed For Use With Oil-based And Water-based Wood Stains
Preparations
Surface Must Be Clean, Dry, And Free Of Dirt, Grease, Oil And Lose Particles. For Rotted Wood Use Minwax Wood Hardener To Strengthen Wood Fibers Before Applying Minwax Stainable Wood Filler. This Product Should Not Be Used On Holes Larger Than 3/4". For Larger Holes Use, Minwax High-Performance Wood Filler.
Application
- Squeeze A Liberal Amount Of Minwax Stainable Wood Filler Into The Area To Be Filled And Press Firmly Into Place, Using A Putty Knife. Fill Slightly Above The Surface To Allow For Sanding While Minimizing Overspreading On Surrounding Areas. Remove Excess
- Allow The Filler To Dry Completely. Dry Time Will Vary Depending On The Depth Of Area To Be Filled. Most Common Shallow Repairs Will Dry Within 2 Hours. For Deeper Holes, Fill In Layers 1/4" At A Time, Which May Require 2-6 Hours To Dry
- Sand Filler Smooth And Flush To The Wood. Remove All Sanding Residue Before Staining, Top Coating Or Painting
Staining And Finishing
Before Filling, Test Stain On Scrap Wood With Filler. Choose A Minwax Penetrating Stain, Such As, Minwax Wood Finish, Minwax Water-Based Stain Or Minwax Gel Stain And Apply According To The Label Directions. After Staining For Interior Use, Apply A Protective Clear Finish Such As Minwax Fast-Drying Polyurethane Or Minwax Polycrylic Protective Finish For Long-lasting Beauty And Protection. For Exterior Use, Apply A Protective Finish Such As Minwax Helmsman Spar Urethane. Minwax Stainable Wood Filler Can Also Be Directly Top Coated With A Clear Finish Or Painted.
Specifications
- Size: 1 Oz
- Application Tool: Putty Knife
- Dry Time: 2-6 Hours, Depending On Size Of The Area Filled
- Cleanup: Soap And Water
- Recommended Uses: For Filling Cracks, Small Gouges, Nail Holes, Knot Holes And Other Defects In Unfinished Wood
- Stain Application: As Soon As Wood Filler Has Dried And Is Sanded
- Cautions: Avoid Contact With Eyes And Skin. Wash Hands After Using. Keep Container Closed When Not In Use. Do Not Transfer Contents To Other Containers For Storage
- Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer.