![Permatex High-Temperature Red RTV Silicone Gasket Maker - 3 oz Permatex High-Temperature Red RTV Silicone Gasket Maker - 3 oz](https://cdn11.bigcommerce.com/s-qz13ep5fb4/images/stencil/290x290/products/83796/232407/d55049a3-8753-42be-ac11-1edeeef18606__77143.1674884001.jpg?c=1)
Permatex Ultra Black Maximum Oil Resistance Gasket Maker - 3.35 oz
OEM specified. For dealership warranty requirements, ultra black ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor-safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistant properties through the use of a patented adhesion system. Temperature range -65°F to 500°F (-54°C To 260°C) intermittent resists auto and shop fluids and vibration.
Benefits
- Improved oil resistance
- Sensor safe, non-corrosive
- Good adhesion and flexibility
- Replaces most cut gaskets
- Can be used as a gasket maker or dressing
- Non-flammable, Non-toxic
- Low odor
Typical Applications
- Oil pans
- Transmission pans
- Valve covers
- Valves and guides
- Timing gear covers
- Differential covers
Suggested Applications
Automobile
Valve covers, oil pans, intake manifold end seals, timing covers, differential covers.
Marine
Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings.
Directions
- For Best results, clean and dry all surfaces with a residue-free solvent, such as permatex brake & parts cleaner
- Cut nozzle to desired bead size gaskets are best formed using a 1/16" to 1/4" bead
- Apply a continuous and even bead of silicone to one surface, surrounding all bolt holes. Remove excess with a knife at once. Assemble parts immediately. Do not squeeze out silicone by over-tightening bolts. Re-torque will not be necessary
- Silicone dries in 1 hr and fully cures in 24 hr at 70 - 50% relative humidity. Allow more time in cold weather
- Replace cap after use. Clean hands with a dry cloth or permatex fast orange hand cleaner. Clean tools with non-flammable cleaning fluid
Specifications
- Color: Black
- Size: 3.35 oz
- Temperature Range: -65°F To 500°F (-54°C To 260°C)
OEM specified. For dealership warranty requirements, ultra black ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor-safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistant properties through the use of a patented adhesion system. Temperature range -65°F to 500°F (-54°C To 260°C) intermittent resists auto and shop fluids and vibration.
Benefits
- Improved oil resistance
- Sensor safe, non-corrosive
- Good adhesion and flexibility
- Replaces most cut gaskets
- Can be used as a gasket maker or dressing
- Non-flammable, Non-toxic
- Low odor
Typical Applications
- Oil pans
- Transmission pans
- Valve covers
- Valves and guides
- Timing gear covers
- Differential covers
Suggested Applications
Automobile
Valve covers, oil pans, intake manifold end seals, timing covers, differential covers.
Marine
Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings.
Directions
- For Best results, clean and dry all surfaces with a residue-free solvent, such as permatex brake & parts cleaner
- Cut nozzle to desired bead size gaskets are best formed using a 1/16" to 1/4" bead
- Apply a continuous and even bead of silicone to one surface, surrounding all bolt holes. Remove excess with a knife at once. Assemble parts immediately. Do not squeeze out silicone by over-tightening bolts. Re-torque will not be necessary
- Silicone dries in 1 hr and fully cures in 24 hr at 70 - 50% relative humidity. Allow more time in cold weather
- Replace cap after use. Clean hands with a dry cloth or permatex fast orange hand cleaner. Clean tools with non-flammable cleaning fluid
Specifications
- Color: Black
- Size: 3.35 oz
- Temperature Range: -65°F To 500°F (-54°C To 260°C)