Zoom the image with the mouse
Super Glue Red Professional E-Z Fuse Tape - 1" X 10'
SKU:
162974
UPC:
073754154060
$9.99
E-Z Fuse Tape is a versatile, easy-to-use product. Designed to adhere to itself, this product leaves NO residue when removed. The bond is permanent, waterproof, airtight, non-conductive, insulating, and resists weathering, salt water, and UV rays. It seals wet or dry leaks, insulates 8,000V (per unstretched layer) and functions at -60° F to +500°F. The flexible material stretches around uneven shapes and is UL Listed. Use for: automotive, marine, electrical, plumbing, sealing, insulating and general purpose applications.
Features
- Indoor & Outdoor
- Water-resistant
- Flexible
- All Surfaces
Works Best On
Boat Rigging, Bundling Wires, Emergency O-Rings, Emergency Radiator Hose Repair, Plumbing Repair, Rope Ends, Weatherproofing Electrical Conn.
Directions
- Cut desired length of tape and remove the plastic protective film before using
- Hold E-Z Fuse Tape in position and apply a complete wrap back onto itself. This initial wrap secures the tape for additional wraps
- Maintain a constant stretch as you continue to wrap, making sure each new layer “half laps”onto the previous layer. These overlaps will fuse together
- Be certain the end of the final wrap is pressed down onto prior wraps. Use less stretch on the final wrap. If applying multiple pieces of tape, always start the end of each new piece in contact with a prior wrap
- For pressure applications, stretch E-Z Fuse Tape to the maximum and apply several tight layers. Non-pressure applications require only a minor stretch and one layer
E-Z Fuse Tape layers begin to fuse immediately, forming a permanent, cohesive bond within 24 hours. Repositioning not recommended after 2 min. of wrapping. E-Z Fuse Tape can be applied in wet, non-oily conditions, although dry surface conditions are suggested for best performance. Do not use on gas pipe or connections.
Specifications
- Color: Red
- Size: 1" X 10'
- Operating temperature: continuous -49°F to 392°F (-45°C to 200°C)
- Operating temperature: intermittent -85°F to 500°F (-65°C to 260°C)
- Cold Brittle Point: -85°F (-45°C)
- Elongation, minimum (ASTM D119): 300%
- Dielectric Strength, Minimum (MIL-I-46852): 400 V/mil
- Tear Strength, Minimum (ASTM D264): 85 ppi
- Tensile Strength, Minimum (ASTM D119): 700 psi
- Certification: UL Listed
E-Z Fuse Tape is a versatile, easy-to-use product. Designed to adhere to itself, this product leaves NO residue when removed. The bond is permanent, waterproof, airtight, non-conductive, insulating, and resists weathering, salt water, and UV rays. It seals wet or dry leaks, insulates 8,000V (per unstretched layer) and functions at -60° F to +500°F. The flexible material stretches around uneven shapes and is UL Listed. Use for: automotive, marine, electrical, plumbing, sealing, insulating and general purpose applications.
Features
- Indoor & Outdoor
- Water-resistant
- Flexible
- All Surfaces
Works Best On
Boat Rigging, Bundling Wires, Emergency O-Rings, Emergency Radiator Hose Repair, Plumbing Repair, Rope Ends, Weatherproofing Electrical Conn.
Directions
- Cut desired length of tape and remove the plastic protective film before using
- Hold E-Z Fuse Tape in position and apply a complete wrap back onto itself. This initial wrap secures the tape for additional wraps
- Maintain a constant stretch as you continue to wrap, making sure each new layer “half laps”onto the previous layer. These overlaps will fuse together
- Be certain the end of the final wrap is pressed down onto prior wraps. Use less stretch on the final wrap. If applying multiple pieces of tape, always start the end of each new piece in contact with a prior wrap
- For pressure applications, stretch E-Z Fuse Tape to the maximum and apply several tight layers. Non-pressure applications require only a minor stretch and one layer
E-Z Fuse Tape layers begin to fuse immediately, forming a permanent, cohesive bond within 24 hours. Repositioning not recommended after 2 min. of wrapping. E-Z Fuse Tape can be applied in wet, non-oily conditions, although dry surface conditions are suggested for best performance. Do not use on gas pipe or connections.
Specifications
- Color: Red
- Size: 1" X 10'
- Operating temperature: continuous -49°F to 392°F (-45°C to 200°C)
- Operating temperature: intermittent -85°F to 500°F (-65°C to 260°C)
- Cold Brittle Point: -85°F (-45°C)
- Elongation, minimum (ASTM D119): 300%
- Dielectric Strength, Minimum (MIL-I-46852): 400 V/mil
- Tear Strength, Minimum (ASTM D264): 85 ppi
- Tensile Strength, Minimum (ASTM D119): 700 psi
- Certification: UL Listed
