Thompson's Waterseal Clear Waterproofing Wood Protector - 1.2 gal

The wood sealer that provides long-lasting outdoor wood protection. It waterproofs long after the initial water beading is gone.

Features

• Prevents water damage
• Helps maintain wood's natural color
• Coating resists mildew and UV damage
• Exceeds Industry Standard ASTM D-4446 For Waterproong Wood
• Use on - decks & fences, outdoor furniture, exterior wood
• Application tools- painted, brush, sprayer, roller

Directions For Use

Before You Begin

• For exterior use only
• For wood substrates only
• Allow 30 days before applying new pressure-treated lumber
• Be sure that both surface and air temperature are above 50 during application and for 48 hr after application. Do not apply the product if rain is forecasted within 24 hr of application
• Perform the splash test. Sprinkle water on various sections of the surface to be sealed. If the water absorbs and darkens the color of the
• Surface within five seconds, the surface is porous and considered ready to be treated. If water beads up or otherwise sits on top of the surface, then the surface does not need protection at this time
• Cover plants and shrubs. Move all objects that could come in contact with overspray. Overspray of product onto glass should be removed immediately with paint thinner or mineral spirits, following the manufacturer's safety recommendations
• Do not use in below-grade applications where water pressure is a problem or on painted or recently stained surfaces
• Do not use it as an additive to paint
• Do not freeze do not store below 32
• Excessive oiliness caused by over-application may be removed by scrubbing wood with a concentrated degreaser

Surface Preparation

Warning

• Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (niosh approved) and proper containment and cleanup. For more information, call the national lead information center at 1-800-424-lead (in us) or contact your local health authority
• Surfaces and substrates must be free of all mildew stains, dust, dirt, oil, soot, grease, and other contaminants
• Surfaces must be thoroughly cleaned prior to application with a deck cleaner (like those in the thompson's waterseal cleaner line) applied according to label directions and cautions.
• Remove all existing loose, flaking, or peeling stains. Failure to do so will result in continued flaking and peeling
• If the surface is damp or wet from cleaning or weather, allow the surface to dry thoroughly (a minimum of 48 hr) before application

Applications

• Do not mix with other waterprooing products; variations in the final appearance of the surface being treated may result
• Do not thin
• Shake contents well before use. Shake or mix thoroughly before and occasionally during use
• A small trial patch should be tried before application over the entire surface
• Only one light coat is necessary for most applications
• Apply by brush, roller, dipping, or sprayer. A garden pump-up style sprayer is the simplest method. If over-applied, remove excess before it dries by redistributing to dry areas or wiping off
• Use only with adequate ventilation
• Oiliness and tackiness will result if over-applied, applied to a wet or damp surface, or if the overnight temperature falls below 50 within 48 hr of application

Drying

• Allow at least 48 hr to dry - however drying time will vary depending on the substrate, temperature, and humidity
• Allow a minimum of 30 days drying time before applying oil-based paint over thompson's waterseal waterproofing wood protector clear. Do not apply latex-based paint over thompson's waterseal waterproofing wood protector clear
• The length of protection will vary depending on the environment
• Perform the splash test once a year to see whether reapplication is necessary. For maximum protection from color change and other damage caused by the sun, reapplication is recommended every year
• Vertical and horizontal surfaces will experience color changes at different rates

Clean Up

• Clean brushes and equipment with mineral spirits following the manufacturer's safety recommendations, then rinse with clean water

Cautions

Contains mineral oil. Contents are combustible. Keep away from heat and open flame. Vapor harmful. Use only with adequate ventilation. For exterior use only. To avoid overexposure, if treating enclosed exterior rooms or porches, open windows, and doors or use other means to ensure fresh air during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (niosh approved) or leave the area. Avoid contact with eyes and skin. Causes eye, skin and respiratory tract irritation. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. First aid: in case of eye contact, flush thoroughly with large amounts of water for 15 min and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call poison control center, hospital emergency room, or physician immediately. Delayed effects from long-term overexposure. Contains solvents that can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. Immediately.

Warning

This product contains chemicals known to the state of california to cause cancer and birth defects or other reproductive harm. Do not take it internally. Keep out the reach of children.

Danger! Harmful or fatal if swallowed. Combustible! Vapor harmful. Irritates eyes, skin, and respiratory tract.

Specifications

• Color: Clear
• Size: 1.2 gal
• Type: Can
• Cleanup: Mineral Spirit