![Touch 'n Foam Max Fill Triple Expanding Sealant - 20 Oz Touch 'n Foam Max Fill Triple Expanding Sealant - 20 Oz](https://cdn11.bigcommerce.com/s-qz13ep5fb4/images/stencil/290x290/products/96046/221556/c002ecc3-ec44-4771-884e-6b6f30f66f29__76117.1674882068.jpg?c=1)
Touch 'n Foam Max Fill Triple Expansion Foam Sealant - 12 oz
SKU:
820624
UPC:
075650000335
$7.99
Maximum expanding formula, in the familiar green can, is the original touch 'n foam sealant formulated to fill gaps and voids all around the home. Max fill provides three times the expansion to fill gaps greater than 1" wide. Its weather-resistant bond seals out drafts while blocking insects and other pests. It can be used indoors or outdoors.
Features
- 3X Expansion to fill gaps greater than 1" wide
- Weather-resistant bond seals out drafts
- Blocks insects and other pests
- Interior / exterior use
- Paintable / sandable
- Saves energy
- Class a fire resistant
Tips
- Wear gloves, eye protection, a hat and work clothes.
- Foam is highly adhesive, and dried foam is very difficult to remove
- Cover any areas you do not want exposed to foam.
- Use drop cloths when working with polyurethane foam
- Make sure surface is free of oil and dirt
- Polyurethane foam sealants require some humidity in order to cure properly. For best results, apply in temperatures between 60-100°F (16-38°C). Allow foam to cure fully before replacing baseboards, window or door frames.
- Shaking for more than 30 seconds may result in less foam yield.
- Do not overfill gaps – fill gaps 1/3 full, allow room for foam to expand
- Wait until foam is rigid before painting or trimming (30-60 min). Landscape foam is UV resistant and will not discolor or break down in sunlight.
- Store aerosol can upright to avoid propellant leakage prior to use.
Specifications
- Boiling Point: -44 °F
- Color: Amber
- Coverage Area: 430 Linear Ft
- Density: 1.01 G/cu-cm
- Flash Point: -155 °F
- Form: Liquid
- Odor/Scent: Light Petroleum
- Size: 12 oz
- VOC Content: 172.4 gal
Maximum expanding formula, in the familiar green can, is the original touch 'n foam sealant formulated to fill gaps and voids all around the home. Max fill provides three times the expansion to fill gaps greater than 1" wide. Its weather-resistant bond seals out drafts while blocking insects and other pests. It can be used indoors or outdoors.
Features
- 3X Expansion to fill gaps greater than 1" wide
- Weather-resistant bond seals out drafts
- Blocks insects and other pests
- Interior / exterior use
- Paintable / sandable
- Saves energy
- Class a fire resistant
Tips
- Wear gloves, eye protection, a hat and work clothes.
- Foam is highly adhesive, and dried foam is very difficult to remove
- Cover any areas you do not want exposed to foam.
- Use drop cloths when working with polyurethane foam
- Make sure surface is free of oil and dirt
- Polyurethane foam sealants require some humidity in order to cure properly. For best results, apply in temperatures between 60-100°F (16-38°C). Allow foam to cure fully before replacing baseboards, window or door frames.
- Shaking for more than 30 seconds may result in less foam yield.
- Do not overfill gaps – fill gaps 1/3 full, allow room for foam to expand
- Wait until foam is rigid before painting or trimming (30-60 min). Landscape foam is UV resistant and will not discolor or break down in sunlight.
- Store aerosol can upright to avoid propellant leakage prior to use.
Specifications
- Boiling Point: -44 °F
- Color: Amber
- Coverage Area: 430 Linear Ft
- Density: 1.01 G/cu-cm
- Flash Point: -155 °F
- Form: Liquid
- Odor/Scent: Light Petroleum
- Size: 12 oz
- VOC Content: 172.4 gal