Victor Easy Set Mouse Trap - 2 pk

Features

• Pre-baited Easy-to-Set mouse trap
• Expanded trigger plate for the highest catch rates
• Easy disposal - just throw away snap trap after a catch
• Made environmentally responsible from forest stewardship council certified wood
• Sized for mice

A New Twist On A Classic Design

Simplify your rodent control routine with the victor easy set mouse trap. Using the original wooden snap trap design with an improved larger trip pedal to ensure higher catch rates, this trap will help you to effectively eliminate rodents around your household or business. Two settings, firm and sensitive, allow you to control the sensitivity of the trap. For the best accuracy and outcome, recommend setting the trap somewhere between these two settings. In addition, these traps require no chemicals or poisons.

Expanded Trigger Plate

The easy set mouse trap enhances the classic snap trap design by adding a large plastic trigger plate to ensure higher catch rates. The expanded size means it can be easily activated both by rodent interest in food and through accidental contact as mice scamper across the floor.

Easy 4 Step Setup

For your convenience, the victor easy set mouse trap is very easy to use. Get your trap setup by following these four simple steps:

• Release the arm bar
• Bait the trap
• Hold securely
• Set the trap

Location

Set the baited trap in areas where you have noticed high levels of rodent activity. Rodents tend to travel along walls, so placement in this location often works best. For maximum effectiveness, use multiple traps, placed at 2' to 3' intervals to increase results. Place the trap with the baited end flush against the wall.

Quick and Effective

Once a rodent triggers the pedal, the easy set mouse trap immediately springs closed to eliminate the pest on contact. After a catch, simply lift the kill bar to dispose of the mouse and reuse the trap or, dispose of the entire trap for quick, clean removal. It's your decision.

Directions

• Release the arm bar from the staple
• Move the arm bar to the back of the trap so it hangs over the back of the trap
• Apply a small amount of high-protein bait, such as peanut butter, hazelnut spread or bacon to the yellow plastic pedal on the trap as shown. Use a q-tip, toothpick or another tool to bait to avoid transferring your scent to the trap
• Pull the kill bar back and hold it in place with your thumb
• Place the arm bar over the kill bar and secure it under the plastic pedal. Take note of the firm and sensitive setting. The trap will be easier to set on the firm side, but not trip as easy. The trap will be more difficult to set on the sensitive side, but trip very easily
• Place the trap where you have seen signs of rodent activity or along the wall where rodents primarily travel. The end of the trap where the metal pedal is baited should be placed flush against the wall
• After the mouse is caught, properly dispose of the dead rodent. The trap can either be discarded or reused

Specifications

• Material: Wood (from Forest Stewardship Council Certified Forests), Copper and other Metals
• Package: 2 pk

Instruction Manual.pdf